Cisco Vs Huawei CLI 20-2 (Configuring Frame-Relay – Static Mapping)

Frame relay is a standardized wide area network technology that specifies the physical and logical link layers of digital telecommunications channels using a packet switching methodology. Originally designed for transport across Integrated Services Digital Network (ISDN) infrastructure, it may be used today in the context of many other network interfaces.

CISCO
NetworksHeaven(config)# interface serial 1/0/0
NetworksHeaven(config-if)# encapsulation frame-relay
NetworksHeaven(config-if)# frame-relay lmi-type ansi
NetworksHeaven(config-if)# ip address 1.1.1.1 255.0.0.0
NetworksHeaven(config-if)# no frame-relay inverse-arp
NetworksHeaven(config-if)# frame-relay map ip 1.1.1.2 102 broadcast
NetworksHeaven(config-if)# end
Useful Commands
NetworksHeaven# show frame-relay map
NetworksHeaven# show frame-relay lmi
HUAWEI
[NetworksHeaven] interface serial 1/0
[NetworksHeaven-Serial1/0/0] link-protocol fr
[NetworksHeaven-Serial1/0/0] fr lmi type ansi
[NetworksHeaven-Serial1/0/0] ip address 1.1.1.1 255.0.0.0
[NetworksHeaven-Serial1/0/0] undo fr inarp
[NetworksHeaven-Serial1/0/0] fr map ip 1.1.1.2 102 broadcast
[NetworksHeaven-Serial1/0/0] return
Useful Commands
<NetworksHeaven> display fr map-info
<NetworksHeaven> display fr lmi-info

Cisco Vs Huawei CLI Commands in Slides